3 inch (76mm) Ultimate Lift Kit for 2012-2014 Honda CR-V HRG Engineering

Description

This is the ultimate lift kit for your 2012-2014 Honda CR-V! Designed to prevent axle or suspension binding issues and increase bushing life, while providing stock ride quality. This ultimate kit includes: Front and rear lift spacers, adjustable control arms for the rear and offset camber adjustment bolts for the front, subframe spacers, all necessary hardware and detailed illustrated installation instructions. This kit is designed to be a level lift.*
Fits all 2012-2014 CR-V.
Our kits are powdercoated for a durable, attractive finish and use grade 10.9 hardware.
*Results may vary depending on condition of existing suspension.
Lifetime warranty!
Professional installation recommended.
For off road use only!
!
!
Proudly Made in USA!
FAQ:
Tire Chart
Stock          225/65/17 (28.4")
+0.5 235/65/17 (28.9")
+1.5 235/70/17 (29.9")
+2 225/75/17 (30.2")
+2.5 235/75/17 (30.8")
Q: "Why are the front spacers taller than the rear spacers? Won't that make it sit much higher in the front?"
A. No. The front and rear suspension geometry is very different and the spacers must be sized this way in order for the vehicle to sit level.
Q. "Will I need an alignment after installing this kit?"
A: Yes, just as if you lowered your car, lifting changes the wheel alignment.
Q: "Will lifting my car affect the axles?"
A: Possibly. This kit is designed to prevent axle issues, but It depends on the condition of axles you have in your vehicle. Rebuilt axles or axles with lots of wear are more prone to having issues. In general, lifting higher than 2 inches will require a subframe drop or "body lift" to maintain proper axle angle (this kit includes the subframe drop).
Q: "Do I need to replace my suspension bushings when installing a lift kit?"
A: It depends on the condition of your existing bushings. We always recommend inspecting your factory bushings and replacing them with urethane bushings such as Energy Suspension if needed. The added benefit of installing urethane bushings is that it allows the suspension to move more freely without binding up.
Q: "Will lifting my car negatively affect the handling?"
A: In most cases, yes. By lifting the suspension you are effectively raising the roll center of the car, which can cause additional body roll. Our lift kits are intended for off-road use where suspension travel and ground clearance are more important.